I fogged my 2011 200 pro xs engine in the fall for the winter. What should my spark plugs be torqued down to? I need to check them in the spring. Is there any easy way to get to these in this motor? Mercury did a fine job of putting an elephant in a shoe box! Lol
2022 Ranger Z518
I used a short extension a med extension and a swivel extension all were easy except number 6 It took a few minutes one piece of advice is to get some pluw wires to pull the boots there exspensive if you mess one up
Proudly number 37496
Recommend utilizing a 12-13" piece of fuel line to thread the plugs into the head. This helps you to prevent crossthreading/damage to threads.
Spark plugs should be torqued to 20 ft. lbs on this engine model.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
2022 Ranger Z518
pluw is plug thats georgia dialect, also that fuel line trick was handy also forgot to mention that 3/8 was what size i used.
Modified by bwwarnock at 5:47 PM 1/16/2012
Proudly number 37496
Reply With Quote
