Okay, I finally got around to changing my L.U. oil today and did exactly like the instructions above stated. Everything went perfect. The old oil was clear and I let one ounce drain after I filled it to allow for expansion. Then I tightened the two drain plugs as tight as I could. My question is: I noticed when I purchased a package of yellow washers from Don that there were 3 that were different from the other 3. Does this make any difference which one goes where and are they all the same washer. In other words is there a top washer and a bottom washer? To let you all know what I did I put the washer with the cross hair looking stripes ( the bottom row of washers ) on the bottom plug with the solid yellow part of the washer out towards the screw head and the cross hairs toward the lower unit. If anyone can make sure I did everything right Please let me know and I will be forever grateful Any way here is a picture of the washers Thanks: