Results 1 to 4 of 4
  1. #1
    Banned
    Join Date
    Feb 2005
    Location
    salsibury
    Posts
    1,228

    ???? about water preasure at WOT

    21xrd 300xs if you are at 1.50 to 1.75 above what should the water preasure be at WOT

  2. Member 70 Mach 1's Avatar
    Join Date
    Nov 2008
    Location
    Gilmer, Tx
    Posts
    956
    #2

    Re: ???? about water preasure at WOT (TarheelXRD)

    Going to depend on the prop you are running. I tested a 29 TXP ot 4 this week at 1.5 above with 18 psi.

  3. Member Largemouthlou's Avatar
    Join Date
    Jun 2004
    Location
    Palm Bch Gardens FL
    Posts
    24,236
    #3

    Re: ???? about water preasure at WOT (70 Mach 1)

    Running top end runs the least ya can run at or close to your limiter on a 3 liter is 10 psi..

    Fishing I would stay at 15 psi

  4. BBC SPONSOR
    Join Date
    Jun 2007
    Location
    Hope, AR
    Posts
    265
    #4

    Re: ???? about water preasure at WOT (Largemouthlou)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Largemouthlou &raquo;</TD></TR><TR><TD CLASS="quote">Running top end runs the least ya can run at or close to your limiter on a 3 liter is 10 psi..</TD></TR></TABLE>

    +1

Similar Threads

  1. low fluctuating water preasure!
    By mercury250xs in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 1
    Last Post: 08-30-2011, 04:01 PM
  2. low preasure pumps
    By old hickory in forum Yamaha Motors
    Replies: 6
    Last Post: 12-01-2009, 10:02 PM
  3. Water Preasure?
    By Parrothead in forum Stratos/Javelin Boats
    Replies: 0
    Last Post: 02-24-2009, 02:59 PM
  4. johnson 115 faststrike,water preasure guage,thermostat location
    By buster502 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 07-18-2007, 09:13 PM
  5. Water Preasure Guage & Jack Plate Questions
    By Mark Wendler in forum Stratos/Javelin Boats
    Replies: 5
    Last Post: 04-14-2007, 06:14 PM