If anyone knows where i can get a good deal on one let me know. Mine has been acting up and I need to change it out asap. Thanks
If anyone knows where i can get a good deal on one let me know. Mine has been acting up and I need to change it out asap. Thanks
Dean Walton Jr
2010 Nitro Z9
250 Pro XS
you sure it's not just the relays?? what is it doing?
No its nothing electrical. Its bleeding down slowly and sometimes while trimming up it squeals like a pig and trims very slow. I was going to pull it down and change seals, o rings etc but from the research I have done and mechanics I have talked to I feel like I would be wasting my time as they tell me once they start doing that you can rebuild them all you want but would be very lucky for the problem to be fixed.
I rather find a re built or used unit and just swap it out.
Dean Walton Jr
2010 Nitro Z9
250 Pro XS
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Skeet22 »</td></tr><tr><td class="quote">If anyone knows where i can get a good deal on one let me know. Mine has been acting up and I need to change it out asap. Thanks</td></tr></table>
Skeet I know a guy that lives not to far from you that might have one you can swap out.![]()
BBT
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Bump »</td></tr><tr><td class="quote">
Skeet I know a guy that lives not to far from you that might have one you can swap out.</td></tr></table>
Yeah maybe he wont mind being his boat does not see the water much..
Dean Walton Jr
2010 Nitro Z9
250 Pro XS
I hear DryDockKohnke has a '03 HPDI, ask him.....
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by timojohn »</td></tr><tr><td class="quote">I hear DryDockKohnke has a '03 HPDI, ask him.....</td></tr></table>
you are right! DryDockKohnke does have an '03 HPDI... Good thing I have an '06!!!![]()
![]()
![]()
Dean.. I will trade you a trim unit for a lower unit!![]()
03 07 there all the same units...
I will pass on the lower unit swap but thanks![]()
Dean Walton Jr
2010 Nitro Z9
250 Pro XS
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by timojohn »</td></tr><tr><td class="quote">I hear DryDockKohnke has a '03 HPDI, ask him.....</td></tr></table>
Never heard of him..
Dean Walton Jr
2010 Nitro Z9
250 Pro XS