Results 1 to 17 of 17
  1. #1
    Member
    Join Date
    Sep 2004
    Posts
    43,706

    Fixed in time for weekend.....Hope Gina's Happy now

    all kidding aside Gina was givin me shit last night about whether her post on here.


    Got a 10' section of 1.5" PVC pipe, t-fitting, 2 elbows and a pack of primer/cement.

    One thin missing........I havn't had a Sawzall since I cen't remember when. I had an Old porter cable one years ago in 90's when worked construction. It took a crap years later & never really had a need to replace it........well I replaced it last night.....................Got myslef a new Milwaukee 6519-30 and a Diamond Cutting blade (the Torch)


    Cut through that 1.5" Cast Iron pipe like it was NOTHIN

    about 9pm we had water going though & ready for dishwasher to run.

    MOMMA'S HAPPY......................................for now

  2. Kansas Bass Club Moderator
    Join Date
    Jun 2004
    Location
    Topeka KS
    Posts
    15,801
    #2

    Re: Fixed in time for weekend.....Hope Gina's Happy now (R.D.)

    Milwaukees are all we use on the job. We put them through hell. Mudded up, wet you name they get it.

    What did you have to do???

  3. Member
    Join Date
    Sep 2004
    Posts
    43,706
    #3

    Re: Fixed in time for weekend.....Hope Gina's Happy now (H2O_Fowl)

    we had a 1.5 line comin from the Kitchen sink that Drained into the Main line. the rest of it had been cut out from the sink to the area it was leaking so I had to cut out section that was bad and put new in. Only problem was it had a fitting that came off top that went tot he sump pump (riser pump) as well so had to make sure to get that in as well.


    not a big deal.....had it done in about hour & half total. just sucks had ot do it last night so we could get things done

  4. Member bigfishingstud's Avatar
    Join Date
    Dec 2005
    Location
    Iola ks
    Posts
    67,181
    #4

    Re: Fixed in time for weekend.....Hope Gina's Happy now (R.D.)

    Your a Good Man Ryan ,, I don't Care what Gina say's about you

  5. Kansas Bass Club Moderator
    Join Date
    Jun 2004
    Location
    Topeka KS
    Posts
    15,801
    #5

    Re: Fixed in time for weekend.....Hope Gina's Happy now (R.D.)

    Oh ok I got ya.

    It's been nice working for this guy that I have worked for the past almost 2 years. Learned alot of stuff from him as he can do most anything. Hell I can put in a septic tank and lateral field by myself, dig a basement with an excavator, do french drains, daylight drains, put in water lines, you name it.

    It's actually been pretty fun learning all that stuff but it's time to get back to doing something with some actual benefits and not so hard on your body.

  6. Member
    Join Date
    Sep 2004
    Posts
    43,706
    #6

    Re: Fixed in time for weekend.....Hope Gina's Happy now (bigfishingstud)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by bigfishingstud &raquo;</td></tr><tr><td class="quote">I don't Care what Gina say's about you </td></tr></table>


    Don't worry....I don't either

  7. Member
    Join Date
    Sep 2004
    Posts
    43,706
    #7

    Re: Fixed in time for weekend.....Hope Gina's Happy now (H2O_Fowl)

    yeah..................there is a pretty good list of things I can do........but some I know better not to. I know my Limits. Getting Dirty & doing grunt work isn't that big a deal for me. Installing Garage Openers. Plumbing, some electrical but I know what I can't do. Some things I'd like to learn like installing a new front door, windows and so on.


    We had a problme with the a/c unit upstairs tripping breaker. So I had Electrician come out & run a dedicated line & install an outlet for just that. Isolated the Garage circuit while he was at it as well......it was worth what I paid for him to do that job.

  8. Kansas Bass Club Moderator
    Join Date
    Jun 2004
    Location
    Topeka KS
    Posts
    15,801
    #8

    Re: Fixed in time for weekend.....Hope Gina's Happy now (R.D.)

    You need to come down and install a 10X10 garge door on my shop for me with an opener.

  9. Member
    Join Date
    Sep 2004
    Posts
    43,706
    #9

    Re: Fixed in time for weekend.....Hope Gina's Happy now (H2O_Fowl)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by H2O_Fowl &raquo;</td></tr><tr><td class="quote">You need to come down and install a 10X10 garge door on my shop for me with an opener. </td></tr></table>


    When

  10. Kansas Bass Club Moderator
    Join Date
    Jun 2004
    Location
    Topeka KS
    Posts
    15,801
    #10

    Re: Fixed in time for weekend.....Hope Gina's Happy now (R.D.)

    As soon as I can gather up the $ to buy one. I made the mistake years ago when I had my shop built to put a sliding door on it and I absolutely hate it.

  11. Member bigfishingstud's Avatar
    Join Date
    Dec 2005
    Location
    Iola ks
    Posts
    67,181
    #11

    Re: Fixed in time for weekend.....Hope Gina's Happy now (H2O_Fowl)

    Let me know when he's comming to do it ,, i'll come up and drink beer and watch

  12. Member War Eagle1's Avatar
    Join Date
    Jul 2007
    Location
    Junction City, KS
    Posts
    15,737
    #12

    Re: Fixed in time for weekend.....Hope Gina's Happy now (H2O_Fowl)

    they make very good tools. glad mom is happen for now

  13. Kansas Bass Club Moderator
    Join Date
    Jun 2004
    Location
    Topeka KS
    Posts
    15,801
    #13

    Re: Fixed in time for weekend.....Hope Gina's Happy now (bigfishingstud)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by bigfishingstud &raquo;</td></tr><tr><td class="quote">Let me know when he's comming to do it ,, i'll come up and drink beer and watch </td></tr></table>

    Ya Ok but no wondering around. Don't wanna be looking all over the place for you.

  14. Member
    Join Date
    Sep 2004
    Posts
    43,706
    #14

    Re: Fixed in time for weekend.....Hope Gina's Happy now (H2O_Fowl)

    yeah no chit

  15. King of the hill jaycount's Avatar
    Join Date
    Jun 2009
    Location
    Towanda, KS
    Posts
    4,290
    #15

    Re: Fixed in time for weekend.....Hope Gina's Happy now (H2O_Fowl)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by H2O_Fowl &raquo;</td></tr><tr><td class="quote">

    Ya Ok but no wondering around. Don't wanna be looking all over the place for you. </td></tr></table>

    put a bell on his collar

  16. Member
    Join Date
    Sep 2004
    Posts
    43,706
    #16

    Re: Fixed in time for weekend.....Hope Gina's Happy now (jaycount)

    you tell Melvin to be there with Bells on.............and that's ALL he'll have on

  17. Member bigfishingstud's Avatar
    Join Date
    Dec 2005
    Location
    Iola ks
    Posts
    67,181
    #17

    Re: Fixed in time for weekend.....Hope Gina's Happy now (R.D.)


Similar Threads

  1. Happy Mothers day GINA
    By R.D. in forum Kansas Fishing
    Replies: 19
    Last Post: 05-05-2009, 07:14 PM
  2. trim fixed i hope
    By billproxs in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 1
    Last Post: 03-26-2009, 02:27 AM
  3. Happy Birthday Gina!!!!!!!!!!!
    By R.D. in forum Kansas Fishing
    Replies: 24
    Last Post: 03-16-2008, 10:17 AM
  4. More pics................with Gina this time
    By R.D. in forum Kansas Fishing
    Replies: 17
    Last Post: 12-31-2007, 03:30 PM
  5. Hope I got it fixed this time.
    By rangerguy in forum Texas Fishing
    Replies: 10
    Last Post: 05-10-2006, 04:44 AM