1) What is the "process" to display Hrs screen ?
Per manual is should appear automatically just toggle to that display.
Did I miss something (Operator Error ??)
2) What is normal operating temp for 06 225 Pro XS ?
3) I would like to order a Mercury Manual for an 06 225 Pro XS.
What are the costs ?
Modified by Bollee at 5:04 PM 3/5/2009
Engine hours is not one of the functions you can toggle to when the system monitor is operating. Engine hours will be displayed briefly every time the system is powered up, right after the software version is shown. So, when you turn your ignition key on and hear the beep, watch the monitor. Immediately after your software version is displayed, your engine hours will be shown.
If you have the Smartcraft Tach, then you can toggle to the engine hours, but if you have the monitor only then the above answer is correct.
For the System Monitor:
One more note... You've got to make sure "hours" or "engine hours" is set to a value of "1" or "on" in your calibration setup. If it was inadvertantly turned off during calibration... you won't see it.
I'll drop you an IM on the manual.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Don beat me to the post and with more detail!
On my smart craft monitor you can get to a screen that displays engine hours.
You have to have it selected in one of the setup menus.
JAZII
Reply With Quote
