Rev Specs 2001 evinrude 225 fitch

[stappy]

Does anyone know the rev spec for 225 fitch

1st evinrude for me. Would like any info.

[Won Hunglo]

5500-6000 later revised to 5800 by the Bomb. I like 6000+

[RUSTY63]

Welcome to the BBC.

The RPM spec's on your motor are 5000 to 6000.

[SEAHORSE]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 &raquo;</TD></TR><TR><TD CLASS="quote">Welcome to the BBC.

The RPM spec's on your motor are 5000 to 6000. </TD></TR></TABLE>


Rusty,

Are you losing it????

FICHT 225 operating range is 5000-6000. It is always best to prop for the upper half of the range and about 5800 is the "sweet spot" with an average load in the boat.

[RUSTY63]

Nope, Im fine, you haven't had to correct one of my posts lately and I didn't want you out of practice.

[Sprint 207]

[SEAHORSE]

Ah yes, the perks of being a moderator. You can go in and correct anything you want, including your own incorrect posts. Now folks reading my comments to you after seeing your "upgraded" post will wonder what the he!! is going on.

[RUSTY63]

Nope, they will wonder if we are going to start the Great Spark Plug debate again.........

Hey, so I made a mistake...have Al dock my pay.....

[SEAHORSE]

I consider you a friend, Rusty, because I know if I ever fell over the side and was drowning, you would be the one to toss me an anchor !!!!!!

[RUSTY63]

I also consider you a Friend, Seahorse, and if you fell overboard I would............Laugh my ass off and then I would throw you the anchor.

[SEAHORSE]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 &raquo;</TD></TR><TR><TD CLASS="quote">Laugh my ass off and then I would throw you the anchor. </TD></TR></TABLE>

And I'm sure the chain would be attached also, but not the line.

[RUSTY63]

Nope, I would make sure it was all attached.......maybe not tied off, but attached.