after the intial start up beeps..i am getting another beep about ten seconds after? all seems to be fine ..dont know what that beep means..gauges dont show anything..this just started bout a week ago..motor is running like a top.
after the intial start up beeps..i am getting another beep about ten seconds after? all seems to be fine ..dont know what that beep means..gauges dont show anything..this just started bout a week ago..motor is running like a top.
GO VOLS
Someone else was having the same issue and Don was addressing the problem and was going to give everyone some more information we he received some answers. Make sure your connections on the battery are tight using stainless steel lock nuts to hold all connections. Also make sure you put the motor cables on first then the auxilary connections. Also verify you have the correct battery specs in place as this can cause some real funky issues as well. Maybe even load test the battery for piece of mind. Hope you get if figured out.
+1on those comments!
To date, battery voltage issues have been at the "root" of each one we've had our hands on (with the exception of cases where faults are registering indicating other sensor issues).
Batteries, battery cables, terminals, GROUNDS, even paint under the ground cable where it attaches to the block. Really hard to catch- but the Computer Diagnostic System does help!
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
