Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    May 2005
    Location
    College Park
    Posts
    85

    2008 ETEC 200HO Water Pressure

    I am not getting a reading on my water pressure guage but the pee stream appears to be strong. The "hot"alarm went off while on plane but would stop when I came off pad. Any suggestion on what to check would be greatly appreciated. The water pump is two years old.

  2. Member
    Join Date
    Mar 2008
    Location
    Rock Island, Illinois
    Posts
    1,172
    #2

    Re: 2008 ETEC 200HO Water Pressure (Ricosuave)

    Had a lot of problem with my water pump for one summer. It would overheat while idling around. Seams like the water pump has to be perfect. They replaced it twice before quit. They may have just did the impeller the first time. I was showing pressure, but apparently not enough.
    LEGEND ALPHA 199DCX / 225 PRO XS MERCURY

  3. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #3

    Re: 2008 ETEC 200HO Water Pressure (Ricosuave)

    the factory publishes a chart of water pressures at different rpms. The most important is that it is 3-5 psi at idle, preferably closer to 5.

    You can find the engine info in the General Information section of etecownersgroup.com

    High speed overheats often are from a clogged or restricted pressure relief valve, worn pump, or aerated water flow into the gearcase from transducers, thru-hull fittings, etc. mounted too close to the engine.
    -----


    A Technical troubleshooter possessing more tools than talent !

  4. Member
    Join Date
    May 2005
    Location
    College Park
    Posts
    85
    #4

    Re: 2008 ETEC 200HO Water Pressure (Ricosuave)

    Just in case this is ever researched.

    Problem solved: Removed cowling and noticed the tubing had backed off, reconnected and all is well.

Similar Threads

  1. Water pressure on a 2008 250XS
    By Jamie in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 2
    Last Post: 04-27-2011, 06:07 AM
  2. 2008 ETEC 200HO Down Again
    By Ricosuave in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 07-29-2008, 03:33 AM
  3. 2008 - EVINRUDE E-Tec Water Pressure Chart (All Models)
    By LIQUID NIRVANA in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 05-08-2008, 04:45 PM
  4. 2006 225HO ETEC(w/2008 dressed block) water pressure/hot alarm
    By Greg_Z21 in forum Evinrude/Johnson Motors
    Replies: 14
    Last Post: 03-10-2008, 12:56 PM
  5. rusty,200ho etech water pressure
    By lucky HO in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 06-04-2005, 08:40 AM