reverse light fuse keeps blowing which leaves me with the inability to back up
2004 titan and 2004 e z loader, trailer was checked by dealer for shorts they claim nothing wrong. The fuse blew 3 times in 5 minutes backing yesterday. could it be the truck? do I need a bigger fuse current fuse is 10amp?
Thanks
Do not use a bigger fuse, as the wiring is only good for that current. Does it blow without the trailer hooked up? If yes, it's the truck, if not, there is a short to ground on the trailer.
Most likely the solenoid wire has gotten chaffed inside the actuator, remove the inner member and inspect the blue wire and how it is routed
Reply With Quote