Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Jul 2005
    Location
    Shirley
    Posts
    4

    Update on Evinrude 225 Ficht RPM problem for Rusty63

    We finally got the problem resolved for the rpm problem I was having with my 2003 Evinrude Ficht. The service tech from Bombardier came and did the troubleshooting. What he did to solve the problem was to update the controller software, and adjust the timing which was off by some 7 degrees. We now have 5550 rpms at WOT and full trim. We got 5 mph back, so things are good again. Once the weather cools off I would expect to get a couple hundred more rpms and a few more mph.

    I also had them check the throttle plates to make sure they were opening all the way and the crank position sensor for the .o45 as you suggested. They both checked out okay.

    Thanks for your help. I just wanted to let you know what the problem was and what we did to resolve it.

    Jerry

  2. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #2

    Re: Update on Evinrude 225 Ficht RPM problem for Rusty63 (JerrySF21)

    Glad to hear BRP and your dealer got it straightened out.

Similar Threads

  1. Evinrude 115hp ficht problem...
    By Spleeb in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 05-25-2009, 09:06 AM
  2. 99 175 evinrude ficht gas or fire problem?
    By mudduck9 in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 04-19-2009, 07:47 PM
  3. Evinrude Ficht problem
    By n2bassn in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 10-02-2007, 06:08 AM
  4. Problem.....04 225hp Evinrude (Rusty63)
    By M Lewis in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 04-22-2007, 05:36 PM
  5. 1998 johnson 175 hp ficht starting problem?????RUSTY63
    By Dixon-Dan in forum Evinrude/Johnson Motors
    Replies: 18
    Last Post: 09-14-2005, 06:04 PM