I have been having some trouble with my trailer lights flickering and I was thinking about just rewiring my whole trailer. The trailer is about 16 years old and I figured that the wiring is just shot. Is this a hard job to do and does anyone know where I could get like a diagram to refference?
Thanks
It is fairly simple, any instructions you would need is usually in the kit... And at this point spend the couple extra $$ and get a LED light kit...
I had a buddy help me, for pulling wire and things.. Took us about 2 hrs to remove all the old and remount the new ones...
get yourself an electrician's fish tape. HUGE help in running wires through the rails.
1995 Bass Cat P2
1995 Mercury 175XRi
check/ clean all your grounds first...........might save from a rewire job
I agree with Calfish. It sounds like a bad ground. If the insulation on the wiring is dry and cracking then replace. You can also use a tape measure to pull wire instead of a fish tape if you wanna save some $$$$$$.
Or we just taped the new wires to the old ones and pulled them throughit was alot easier than I expected.
Reply With Quote