Had two strips come off in my dry storage compartments. I think possibly due to condensation. Anyone know a good way to re stick them?
Had two strips come off in my dry storage compartments. I think possibly due to condensation. Anyone know a good way to re stick them?
3M double sided tape, from auto dealer/supply, used for putting molding on the side of cars same stuff that was on the Blue waters lights.
Make sure the area is clean by using alcohol on the lockers and on the back of the lights.
If done correctly they should never come off. This is my second boat with blue water lights all over them even trailer and have never had a set come lose.
Oh make sure the alcohol has totally evaporated before putting the tape on. Tape makes better contact in the summer with warmer air than during the winter months.
2011-721ProXp/250SHO
+1 on what Ed said, I would also warm the area with a heat gun/hair dryer as well.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Sneezy Beltran »</td></tr><tr><td class="quote"> I would also warm the area with a heat gun/hair dryer as well.</td></tr></table>
I've never been skydiving, but I have zoomed-in on Google Earth really fast.
use a good cleaner on the area before installing. try mek, but wear gloves
Yep, the 3M tape works great. You want to use the red backed stuff. (The adhesive covering on the tape is red)
Reply With Quote