Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jun 2004
    Location
    Dallas
    Posts
    49

    Problem with 2003 150 hp Johnson start and run the stall

    First thing hit the water and start with run for while warm up and long run and few hours fishing so start again no problem i push the console forward gear the motor turn off and repeat start up as same as problem for 10 times i decided the gas pedal to hold my foot about 2000 rpm and push foward gear finally move and high speed run 5500 rpm started the stall back n forth 5500 to 4000 rpm on tachometer it s must be misfired or else. what s the problem last year new spark plugs and tune up etc... Solve the Problem ??

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,199
    #2

    Re: Problem with 2003 150 hp Johnson start and run the stall (deafstratos)

    Check this adjustment and correct it if needed. http://www.bbcboards.net/zerothread?id=357667

  3. Member
    Join Date
    Jun 2004
    Location
    Dallas
    Posts
    49
    #3

    Re: Problem with 2003 150 hp Johnson start and run the stall (ChampioNman)

    thank i will do my best

  4. Member
    Join Date
    Jun 2004
    Location
    Dallas
    Posts
    49
    #4

    Re: Problem with 2003 150 hp Johnson start and run the stall (deafstratos)

    Cheer up to ChampioNman it work run fine and no problem with motor run....... One Expect full wot less speed.......... it was 60mph before i fixed. After fix on adjustment what your pictures describe me Hit the water last saturday the run 55 mph full throttle any thing i missed the adjustment ???

  5. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,199
    #5

    Re: Problem with 2003 150 hp Johnson start and run the stall (deafstratos)

    You need to make sure the clear roller is on the throttle cam follower now letting you get wide open throttle. Take off the cover for your carbs and apply the throttle to wide open. The plates need to be perpindicular to the carb bodies at full throttle.

Similar Threads

  1. 2003 Johnson 175 no start?????
    By bobby in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 11-16-2010, 04:52 AM
  2. 2003 Johnson 150 fuel problem?
    By waterdog34 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 09-29-2010, 02:21 PM
  3. cold start problem on 2003 Evinrude 150
    By serpico in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 12-04-2009, 08:06 PM
  4. 2003 Johnson Idle problem HELP
    By anglertim in forum Evinrude/Johnson Motors
    Replies: 10
    Last Post: 07-20-2009, 06:12 PM
  5. 2003 Johnson 150 HP start problems
    By serpico in forum Evinrude/Johnson Motors
    Replies: 12
    Last Post: 03-09-2008, 07:47 PM