Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Nov 2009
    Location
    Massapequa
    Posts
    4

    2003 Ficht Ram - Hard Start at times after running

    My 2003 250 H.P. Evinrude Ficht Ram starts on the first turn of the key when I first fire her up all the time. This engine has always started on the first turn of the key after warm up and running all day. Maybe I have been spoiled.

    Recently I noticed I have to crank and crank the engine about four times to get her to turn over.

    The plugs were replaced in the spring and have about 30 hours on them.

    Could this be the start of a problem? Thanks.

  2. Member Danrude's Avatar
    Join Date
    Apr 2007
    Location
    Marietta, GA
    Posts
    3,574
    #2

    Re: 2003 Ficht Ram - Hard Start at times after running (billycarol)

    The exhaust pressure sensor may need to be cleaned! Have you de-carbed recently or do you run XD100? Check the plug gap to make sure you are at .030, you may need to re-gap.
    Dan Burnette - Marietta, GA
    Triton 18TRX - 200 HO G2

Similar Threads

  1. Hard to start Ficht
    By leckbass in forum Evinrude/Johnson Motors
    Replies: 14
    Last Post: 03-28-2011, 03:47 AM
  2. Replies: 3
    Last Post: 04-28-2009, 06:22 AM
  3. Hard to start and missing 2003/225 Evenrude HO
    By Wildcats in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 03-30-2008, 05:53 PM
  4. 115 FICHT hard to start
    By saturn in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 05-24-2006, 07:29 PM
  5. Yammie Hard to Start & Running Rough
    By Culln5 in forum Yamaha Motors
    Replies: 21
    Last Post: 04-20-2006, 06:48 PM