First off I would like to apologize if this has been addressed before but I did several searches and couldn't find anything. So I purchased a 1983 Ranger 373 last year and the boat has been repainted. The top cap has some of the original metal flake paint and the Ranger "swatch" is still there under the bumper. But the rest was painted white and a very poor job was done looks like no clear coat and lots of over spray all around. I was just messing around and wet sanded a small small on the top coat with 2000 grit wet sand paper and the paint removes VERY easily. I know they probably repainted the boat for underlying cosmetic issues so I guess my question is should I completely sand the entire boat and repaint? Or is there a different suggestion on what you guys would do with the boat. Thanks a lot and great forum!