Some pictures finally. Still (!) not done though.

[HydraSports]

This is my project. I intend to have it ready to fish this spring.

I bought it damaged. I worked for a fiberglass boat company at the time so I figured no problem getting it fixed.

The big missing part was actually cut off puposely to get behind things to back them up with cloth.....

I still have alot left to do but have made some headway.






The last picture is the good side....That side is in good condition.....Polish the wheels and put on a new rub rail and it would look good from that angle

On the bright side, everything is solid. The floor, transom etc.

[HydraSports]

I have the missing piece....Like I mentioned that came off purposely. I felt it would be necessary to get to the back side of things....

I also have lots of new parts, battery trays, on board charger, carpet, etc.

I want to fab a deck extension. All the way back to the console....That might end up being an on-going project. Like I mentioned the important part is getting it on the water.

I have a few questions that I'll search for an answer on....

[ragin_cajun92]

its lookin good so far

[HydraSports]

I need to get some resin and hardner, and some sort of filler agent. Carbosil, wood flour, or microbubble's.

Anyone able to recommend a good source.

Since all this stuff can't be simply UPS'd I'm a bit worried about shipping costs....

Is West Marine a good source.

There is one approx 1.5 hours away, but I also am much closer 1 or two times a month....On the way to my in-laws.

[ProcraftMike]

The boat has some good potential!! I buy my supplies from an outfit in Florida called, U.S. Composites. Good stuff and reasonably priced. Do a search and they will come up.

[kisskollector]