Northrivergeek's Hyda-Sport VS150 restore progress update 12-20-08

[northrivergeek]

Ok guys and gals Im real close to having the sucker wrapped up .. at least wood wise,
floor and 90% battery / flotation box on left side, and 50% on the other side, all I lack is finish the boxes, put in gas tank shelf, and a few reinforcements here and there.

Then the top cap will be ready to go on .. I have 2 gouges to fix on the top cap .. got carried away with carbide burr cutting through the glass patches between hull and cap, but not big deal just another thing to fix .. before cap goes back on get new bilge and 90 degree livewell pump installed, a couple through hull fittings that got broke taking off the cap, easier to do now than later .. and then the cap goes back on

Here is pics of floor before top coat of resin and mat, and one of the battery boxes still in progress then below that is floor with resin and glass, and left battery / foam box

[ProcraftMike]

I must say, you sure get into some incredible projects. I think you are the go to guy for boat refurbs ....

[northrivergeek]

Thanks .. yes I do get fully involved into every thing I do .. I jump with both feet full on no stopping me now when I decide to get r done.

If the weather was cooperating better Id be done by now .. but I aint far from it

[Ol JohnnyBoy]

Looking good. Cannnot wait to see the finished product

[HydraSport205]

Looks great; I too look forward to the finished product pics.