This is a project that I completed while on R&R leave..This only took about 1.5hrs and came out pretty good and I really like the look and the functionality of it. Only thing was that I had to trim the tempet because the templet was too big and would have ruined the install but luckily I realized this and measured the pedal and trimed the templet once I did that I was ready to go..
then I traced with a sharpie.....
here I removed the carpet and drilled the pilot holes....
then I cut out the deck for the tray....
I had to remve some of my storage copartment for fit..
then I drilled a hole for the drain.....
secured the tray..and insert the pedal....and wallaaa..complete
Reply With Quote
