I bought a 492VS Ranger in great shape. I rmoved the older electronics and gps that used an external antenna and now I have about a one inch round hole through the gunwale. I know how to repair the hole with a plug of glassed wood but what I am not sure of is the gel coat. I got the matching flake and clear gel coat from Ranger. Do I just mix the gel coat and add the proper amount of flake and apply it to the repaired area and cover it with wax paper or do I add the flake and gel coat but keep it about 1/16th of an inch below the surface and then just add the clear with no flake to top it off?