Ranger 350V deck extension measurements

[tpgrealty]

I made this deck so it would be removable. There are no screw in the floor. I have had this boat in rough water with the deck extension in and had no movement of the deck. 2 people can fish from the front deck now.

a=29.5 inches
b=49inches
c=29.25 inches
d=53 inches
E=29.25 inches
F=29 inches

Green lines = 3/4 inch preasure treated plywood vertical supports that run the distance marked.
Orange dots = 2 x 2 inch treated wood vertical supports that are 8.75 inches tall that act like legs of a table. They are screwed in with ss screws into the 3/4 inch vertical boards and into the top deck plate with ss L-brackets

Top deck plate is 3/4 inch preasure treated plywood. You will need to angle cut sides C and D in front of console
ALL WOOD IS PREASURE TREATED AND IS SEALED WITH EPOXY BEFORE BEING PUT TOGETHER.


Finished deck will just lay in boat.

[scfisherman]

I was trying to build your plans but your images are not on here anymore. Can you send them to me? Thanks

[TerrysRanger374V]

that looks great looks like it might fit a 374v also, would you sen d me the pics, they did not seem to load correctly and parts are missing.
i can get the dimensions from your post
thanks
T

[rgsauger]

FYI, if you're sealing it all with epoxy resin, you don't need to use pressure treated and would actually get a better seal without it. In a perfect world, use something like Hydrotec marine plywood. Resin coat/soak all edges thoroughly and all surfaces.

[MTTDUDE]

It's a long shot but anyone ever did this and how did it turn out like I can't seem to see the pics everyone else is saying looks nice