I am currently running a 93 javelin 379 with 150 fastrike with new monty racing powerhead, about 185 hp with a 24p raker at 3 3/8" below pad turning 5600. The water pressure is 25 psi at wot, chines from 61-63 and then clears up and tops out about 68 or 69 depending on water. I am also running a 5 1/2" jackplate. The main issue I have is that I have to trim the motor all the way up to really make the boat run well, but then the steering torque is extremely excessive. I am curious if there is something I am missing in my setup. The current prop I have is in very rough shape and have been contemplating a new prop or prop change and I am curious what would be a good option to maintain holeshot and top speed, but help out with the torque steer other than hydraulic steering. Sorry to be long winded but trying to give all the info I can to help everyone out. I also have a set of 2" spacers which I purchased but haven't installed yet and not sure if these would help or not.

Thanks in advance for the help,