Bought a used 150HP 2010 Etec and the thrust washer that came with the motor (in between gear case and prop) is not compatible with the 23P Renegade prop I bought for it, as the shoulder of the thust washer will not fit into the recess of the hub of the OMC prop.
Can anyone tell me if the OMC thust washer's shoulder is a smaller diameter then a Merc or do I have a incorrect hub on the prop I bought for this ?
The Renegade prop takes a different thrust washer than the Raker, you will also need a weed ring as well. Part # for washer is 126869.
Dan Burnette - Marietta, GA
Triton 18TRX - 200 HO G2
Sounds like you have the old Raker larger style thrust washer. part # xxxxx70
1996 STRATOS 278 V
1996 Intruder 150 HP
Model 150GLEDB Serial # 04148601
1991 335195 Heads
FICHT Reed Cages
Chris Carson Carbon Fiber Reeds
Large Bore Carbs
Prop Mark Croxton A45 15" X 23 Tempest
Props Owned/Tested: 23 Renegade, 23 Renegade B&B, 22 Raker, 24 Raker, 24 Raker B&B, 26 Raker, 26 Raker II, 24 Raker II, 23 Tempest, 24 Tempest, 24 Fury, 24 Trophy, 25 Renegade, 27 Renegade, 23 Razor 3.
Thanks gentlemen.
The part number on the one I have is 126870.
Anyone need this one for $10.00?
Reply With Quote