carb jets

[red devil]

I have been having issues with my e200stlens coming out of the hole on my bcb pII. I had replaced the gaskets in the carbs but apperntly didn't get all the jets cleaned. I found 5 of jets size 32 were clogged pretty good. Are those the jets that control idle and take off?

[ChampioNman]

there are two sets of jets (orifices) that control the idle circuit, the 32's and 28's (intermediate) right above the 32's. Also make sure your High speed orifice (65D) is fully seated. That is behind the carb bowl drain plug.