Results 1 to 3 of 3
  1. #1

    200H.O Shutting Down

    Model No E200DHLSD
    Serial No 05145233
    Took the boat out for fish and it ran fine for the 10 min run up the lake, after fishing for a while we went to shift spots. I got it up on the plane and ran to around 4500 rpm it ran along fine, gave it a bit more gas and at around 5000rpm it just cut out, once the boat was stopped i hit the key and it fired back up, got it back up on the plane and it cut out at around 5000 - 5100 rpm. It just shuts down, if i keep it under 5000rpm it runs fine. It's in the shop now but just wondering if anyone else has had this problem?

    Cheers Damien



  2. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #2

    Re: 200H.O Shutting Down (bassfanatic5)

    Chaffed wire harness on the engine, they need to look at the lower starter bracket what they will see is the yellow wire has a rub mark in it basically a dent in that wire.

  3. #3

    Re: 200H.O Shutting Down (ELGIN)

    Thanks ELGIN i will let them know so they can check.



Similar Threads

  1. 300 X shutting down
    By fastcatboater in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 3
    Last Post: 09-18-2011, 05:35 AM
  2. My '03 200H.O. went BOOM!!! Why?
    By jet-mech in forum Evinrude/Johnson Motors
    Replies: 9
    Last Post: 05-27-2010, 04:13 AM
  3. zx190 with 200h.o?
    By dell60_9 in forum Skeeter Boats
    Replies: 7
    Last Post: 02-06-2009, 12:47 PM
  4. 200H.O Top end revs
    By bassfanatic5 in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 10-03-2007, 01:05 AM
  5. Yamaha 200h.p. Pro V
    By erwin1958 in forum Yamaha Motors
    Replies: 3
    Last Post: 02-09-2007, 12:20 PM