Results 1 to 2 of 2

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    May 2013
    Location
    Goodlettsville, TN
    Posts
    3

    Z21 electrical panel issues

    2019 Z21 all pumps (fill/recirc/pump out) and bilge quit working, fan, lights and horn still work, replaced the switch panel and that didn't fix it. Checked all my fuses and all are good. I noticed when I replaced the switch panel my anchor light will blink every 10 seconds or so on the switch panel. Didn't know if that had any meaning or not or if anyone had any knowledge of what to check next.

  2. Member
    Join Date
    Jun 2009
    Location
    Bristol, VA
    Posts
    1,464
    #2
    Sounds like you lost the ground somewhere. Get a voltmeter, start at the battery checking voltage, then at the fuse panel, then switches, etc. Don't know what you mean by "replacing switch panel" but you may have disconnected one of the ground wires.
    2004 Tracker PT 175
    2014 60 HP Mercury 4S CT
    1989 Coleman Crawdad

Tags for this Thread