All before and AFTER most recent update.
Unit seems to be extremely hot on the back. I've tried about every combination of connections and rechecked power and ground.
1- Alone, no connection to any TD. only power (VERTICAL LINES).
2- Connected to power and MG LIVE2 (VERTICAL LINES)
3- Connected to 5PS SWITCH (that is connected to iPilot and 360, HELIX 15 G4N) (VERTICAL LINES)
4- Reset to Factory Default (VERTICAL LINES)
5- Voltage at unit (13.1v)
6- Tested with NO other electronics on and with all electronic running. (VERTICAL LINES)
7- Turned unit on FIRST and LAST (VERTICAL LINES)
8- Used working TD from other units to test and no change.
9 - Took out and swapped location of MAP CARD too. (VERTICAL LINES)
Contacted HB and they said they hadn't seen any reports like this? At least i'm good for something. They are "evaluating this" before offering any correction or fix.
Has anyone heard or seen similar?
Reminds me of an old XBOX going bad (RROD). OVERHEATED and Paste on the processor would thin out causing overheating. I used to take those apart and reapply new paste and be good to go. Not trying it on this though.
Hopefully they either have a secret reset that fixes this or rotate in a new unit quickly.
pic1.jpgpic2.jpgpic3.jpg
Reply With Quote