If I turn on the GLS 10 before turning on the ultra I get no image I can adjust to 100 feet and there’s no bottom / no image
If I turn the ultra on first and let it boot up then turn on the GLS 10 it works fine
This is something I’ve done for years as the power switch for the GLS 10 is on the dash then I go up at the bow and turn on the Ultra but now I have to go up on the bow turn the graph on then come back to the dash and turn on the GLS 10
"The handicapped angler"
So no one has encountered a similar issue?
It’s not an intermittent issue it happens every time I power up the GLS 10 first
And never happened until the latest update
"The handicapped angler"
Never seen it so I can't offer advice except to call Garmin. I have GPSMAP units and with mine it doesn't seem to matter what powers is turned on first. I've even hot swapped GLS10's without issue.
My wife asks if I'm going to fish every day. I can't fish every day. Some days I might be sick.
Can’t help…I always turn on my echomap units first.
Unless the new update has something you really want, go back to the last update that worked
Most likely culprit is the ethernet cable.
My wife asks if I'm going to fish every day. I can't fish every day. Some days I might be sick.
Reply With Quote