US2 adaptor for a LIve unit

[greenfshrmn]

Just purchased a Lowrance LIve unit, and I'm having trouble finding an adaptor cable that will go from my MInnkota US2 to the 9 pin Live unit at the bow. Are these even available ? Thanks for any help you can offer.

[NoCAL]

Google is your friend. I did this exact search last night and must have found 2-300 different sources. With Ama…… being the first

[NoCAL]

Here, I’ll do it for you https://minnkota.johnsonoutdoors.com...lowrance-9-pin

[greenfshrmn]

Thanks for doing it for me but, sadly, that's not the right one. My us2 adaptor has a small, steel, knurled, 4 pin connector.

[NoCAL]

Something is not right. You probably should call Minnkota with your serial number and find out what the deal is. The link I posted is for connecting a Minnkota US2 to an HDS Live and provides only 2D sonar. I have set up multiple guys with Fortrex and Ultrex and this is the cable they used.

[Chuck H.]

Here, I’ll do it for you https://minnkota.johnsonoutdoors.com...lowrance-9-pin

I just used this connector to connect my new Quest to my Live 12.

[Wayne P.]

I just used this connector to connect my new Quest to my Live 12.

That is not the US2 adapter which is a 83/200 kHz 2D transducer.
The Quest adapter is for DSC (Dual Spectrum CHIRP).

The US2 adapter has a title of MKR-US2-XX. The XX would be the number for the Lowrance connection.

[NoCAL]

https://minnkota.johnsonoutdoors.com...s2-10-lowrance

Ok, then it’s this one but I believe this will also require a 7 to 9 pin adapter to be able to connect to a Live unit. The Live only has 9 pin connectors.

[greenfshrmn]

Found it!...I think. Says its good for Elite Ti2 and HDS. Looks like a 9 pin. Just hope it works on a "Live" unit. Thanks guys. https://minnkota.johnsonoutdoors.com...-elite-ti2-hds