Ghost TM + Mega 360 + Livescope

[Ohbasser]

So I bought a new boat. It has a Lowrance Ghost TM. My previous boat had an Ultrex TM with the Mega 360.
Before I sold it I took off the Mega 360 along with the Helix 15 CHO.
I also recently bought a Garmin Livescope.
I am trying to get all 3 pieces to work together.

I plan on getting a Mega 360 mounting plate from Boat Logix for the 360.

Is there anything else I need to get the Mega 360 to work?


I will be running dedicated power wire for both the Helix & Livescope.

[ifishinxs]

With all of that on the TM. Only thing left is a strong left arm to get it stowed.

[78Staff]

I'm using the BFE Mount with my Ghost, although I'm only using 2 of the 3 pieces as I have the shorter Fortrex version of the M360...

BFE Lowrance Ghost Mega 360 Mount

Are you planning on using the oem Garmin Livescope Mount. If not, ether the Rytek or Fish Obsessed are the most popular aftermarket mounts - I think with a 360 the FO mount offers more clearance though.

[Brewerbass]

FO mount is easier to use with 360. If you have the ultrex version of the 360 the mouting plate will bolt right on to the ghost saving a few bucks

[SkidooSteve12]

FO mount is easier to use with 360. If you have the ultrex version of the 360 the mouting plate will bolt right on to the ghost saving a few bucks

Your Ultrex Mega 360 mounting plate bolted right to your Ghost? Mine wouldn't fit so I made my own custom plate out of a steel plate. I first used an aluminum plate but that broke after while.

I'm just using the stock Livescope 34 mount with my Mega 360 on my Ghost. I even added my Helix 10 MDI transducer to the bottom of my Ghost with a custom mount which took some work to figure out, but it hasn't budged. I'll try and post a pic of my setup soon.