Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jul 2004
    Location
    Lindon, Utah
    Posts
    7

    1985 Evinrude 70 hp "HELP"

    I have a friend that just purchased this boat and needs some help. It is a 1985, Evinrude 70 hp motor. It starts and idle good, but when I try to accelerate from a fast trolling speed to cruising speed the motor starves for fuel and dies.
    I have found that if I activate the choke while throwing the throttle forward it jumps right out of the hole and away we go.
    The motor is oil injected, not mixed. It is on a 16 foot aluminum Fisher boat with 2 people in the boat.
    Fuel is new, spark plugs new. Carburetor bowls were drained and checked for water.
    Any thoughts would be helpful.

    Thanks
    apsbass

  2. Member
    Join Date
    Jun 2004
    Location
    Neenah
    Posts
    3,619
    #2

    Re: 1985 Evinrude 70 hp "HELP" (apsbass)

    Welcome aboard.

    Is there a fuel filter installed on this somewhere? On some motors, there is a filter screen, that I believe is attached to the side of the carb by one screw (through the center). I'm not sure if yours is set up this way or not. Look for fuel line restrictions or kinks in the fuel line.

    I'm not sure, but would a bad fuel bulb cause this??



    Modified \'92 Procraft 170 Combo/\'97 Johnson 130<U></U>

  3. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #3

    Re: 1985 Evinrude 70 hp "HELP" (apsbass)

    Welcome to the BBC.

    Has the motor set any amount of time?

    Sounds like the main jets are plugged, they are behind the carb bowl drain screws.

  4. Member
    Join Date
    Feb 2005
    Location
    newsalisbury
    Posts
    1,141
    #4

    Re: 1985 Evinrude 70 hp "HELP" (RUSTY63)

    sounds like carbs need a little work,cleaned,rebuilt.

Similar Threads

  1. 1985 Evinrude xp 2.6
    By bkcole2 in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 06-14-2010, 03:09 AM
  2. 1985 EVINRUDE WILL NOT RUN HIGH SPEED
    By INDOBORN in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 09-10-2008, 05:25 AM
  3. 1985 Evinrude 15 Horsepower E15RC0B
    By Zoomie in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 06-29-2008, 07:26 AM
  4. 1985 evinrude 70 hp 3 cyl VROreplacement question
    By agdave112 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 04-18-2008, 11:35 AM
  5. Need new powerhead. 1985 175 hp evinrude
    By IL_Glastron in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 07-20-2006, 04:37 PM