I’m pretty sure I know the answer. Just spooled up braid with mono backing and it would fluff the spool when it hit the ground with the practice weight hit the ground. my finger was on spool. This means my mono backing wasn’t tight enough right? Probably going to do the electric tape route.
7DF1FE2F-9C55-4B64-A63B-A6019092AF84.jpeg
Last edited by Sh402; 08-07-2021 at 03:53 PM.
It sounds like you didn't put enough tension on the braid when you filled it. If your finger was on the spool as it was falling it shouldn't have kept turning at all.
2001 Champion 187 Yamaha 175
12' Talons, Lithiums and Garmins
All pulled by a Hemi
Ok thanks, first time it ever happened, I was in a rush spooling. 23$ of power pro ss v2 down the drain.
Actually it sounds like you may not have enough brake on it. In any case just tie the braid to something and walk it off and crank it back on under some tension.
No need to waste it.
Reply With Quote