In Lowrance’s installation instructions for the stow and deploy assist spring, there is a reference in steps 2 and 3 for “washers”. Here’s how it actually reads verbatim:
2 ”Secure the stow and deploy assist spring and the washers to the lower bracket using the screw and binding barrel.”
3 “Raise the motor until the stow and deploy assist spring reaches the upper bracket. Place the two washers inside the bracket and secure the upper arm of the stow and deploy assist spring.”
The “parts required” do not list any washers and the installation diagrams do not show any washers.
can anyone tell me if they ran into this discrepancy and also how you managed around it?
Reply With Quote
