I had the HOT alarm go off on my boat (2007 Ranger with 2007 225HO Etec).

I was wondering a few things about the water pressure:

1. What should it show at idle?
2. What is typical for pressure when running along at ~40MPH?

Mine barely registers at idle, and is about 10PSI at 40MPH.

ETEC Model: E225DHLSU, S/N: 05186373

The HOT alarm comes on at above 5000 RPM after I cruise for a while, when it did, the TEMP gauge did not seem too high, ~160 maybe, was hard to tell with all the racket from the alarm.




Modified by rzone at 11:45 PM 6/22/2008