Thread: Starter Issues

Results 1 to 2 of 2
  1. 11-06-2019, 12:52 PM #1
    Table Rocker Basser
    Table Rocker Basser is offline
    Member
    Join Date
    Jun 2019
    Location
    St. Peter’s, MO. 63303
    Posts
    19

    Question Starter Issues

    I have a 1986 Mercury 150. Replaced starter, solenoid, and battery. When I turn the key I still get only a click. All cables seem to be ok. I get 12v from ignition to the solenoid. Any ideas of what to check next.
    Reply With Quote Reply With Quote
  2. EuropeanAM
    EuropeanAM is online now
    Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    97,867
    #2 11-06-2019, 12:56 PM
    If you would, please take a moment to review the Announcements at the top of the Forum, and be sure to provide the Required Info when posting. Thanks!

    Monitor voltage on each side of the Starter Solenoid (one side at a time) while attempting to start the engine. Either you have a bad component you installed, OR you have a cable/connector/wiring problem.


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread