my motor starts easily but surges at idle and will not turn above 1500-2000 rpms under load, also will not turn above 3000 rpms unloaded. compression is as follows (not sure of cyclinder numbering sequence)as viewed from exhaust plate Top right- 95 mid right - 100 bot right - 95 top left - 100 mid left - 100 bot left - 100 spark easily jumps 7/16" gap on all cyclinders plugs were installed new @ compression test (5/22/05) boat was test run 5/23/05
Thanks in advance, Robert




Modified by Skeeterdude at 11:05 PM 5/27/2005