New Powerhead Fitted.

[bassfanatic5]

Hey I told Liquid Nirvana that I would post the findings of the new 2008 dressed powerhead over my old 2006. Well this engine is an animal, I have the boat set up with 5 1/2 cmc manual jackplate and a set of wedges about 1 inch thick at the top. I am running the cav plate 143mm or roughly 5 5/8'' above the pad and for a fan I am spinning a 27'' pitch renagade bass. This motor has better power through the full rev range. Posting a quick pic of the outcome. GO THE E TECS

Cheers Damien

[LIQUID NIRVANA]

Told ya didn't I. Just keep the RPM to no more than 5800 to prevent extra oil being pumped in to protect your baby. No real advantage in running over 5700.
================================================== ==

[Bassmeister]

OHHHH but YYYEEEEESSSSS!!!!

[bassfanatic5]

Yeah have a prop coming from the Labsport boys I will try and knock 150 to 200 rpm out of the beast and maybe pick up some speed. It wanted to keep winding out, the handheld said 77.6mph and i think it may have clocked over 78 but I am very happy with it.

[unclemark]

No.no...no...you gotta quit taking pictures of your GPS after towin it home.... Highway speed dont count!

[Bassmeister]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by unclemark369 &raquo;</TD></TR><TR><TD CLASS="quote">No.no...no...you gotta quit taking pictures of your GPS after towin it home.... Highway speed dont count! </TD></TR></TABLE>
Us Rude owners don't have to resort to that tactic!!!

[unclemark]

Toooshayyyy, Off the subject I started using sea foam today instead of carbon out and staybil.... Seafoam does take the place of both doesnt it??? what ratio do you add it in yours???? I used the 16oz can in 32 gal. or 1oz to 2 gal. Is that about right????