<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by noelm &raquo;</TD></TR><TR><TD CLASS="quote">I have seen a very similar problem a few times, but not too sure how it could just happen now, there is a very common fault that will allow forward and neutral, or reverse and neutral but not both, no amount of adjusting can fix it, the usual cause is the small plastic gears that move to engage the gears when the lever is moved (not the big round looking one) they just wear a bit and no longer give you the travel you require for forward and reverse, you can adjust for one ot the other, might help you out, but also may just send you on another "look and see" but worth a look at least.</TD></TR></TABLE>

Thanks - something else to look at when I get it all apart again. One thing though is that the handle will move through the whole range perfectly when disconnected from the cable, but not when connected - would this fit with the problem you have seen?