Last year I bought a 1996 Sprint bass boat and now that the boat is in the garage for the winter I would like to add and replace a few things to be ready for the new season. What is involved in changing the impeller on a 150 Evenrude(E150GLEDM) snG03775819 and should I use OEM or aftermart part. Also what is needed to instal the 2 guages and and instructions or pics on the above installations. Any other ideas on what you would do on a boat and motor this old would be a great help
You need to make sure that the sender is in place for the trim gauge first, If not you will need that, and a cable harness to run to a new gauge. While you are running the trim harness wire you may as well pull the hose for the WP gauge. That one will T off the discharge tube. You'll also need a hole saw for the gauges.
You will need BRP #5001594 for your water pump replacement, that is the way to go. And you can click on the BRP tips link to help you out.
Ok thanks for the part number and the boat already has two pop outs for the guages at the dash and what looks like a sending unit for the trim guage. Im alittle confused by the WP hook up when you say a discharge hose. I was told it hooks up to the head when you remove the brass plug.
Yep sorry misread your model number the H20 pressure kit will have the proper fitting to attach the hose to the block. Sorry was a long day yesterday and I messed up.
Reply With Quote