Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Sep 2009
    Location
    Toms River
    Posts
    1

    1999 Ficht Problem

    1999 Evinrude Model#E200fcxeen Serial#G04647773 Ran offshore for 2 hrs and trolled for 6 hrs. On the way home I heard a kocking sound, backed off the throttles and shut off both motors. Limped home on one motor. I have 600 hours on the motors and I fixed most usual problems: Blown computers, oil pumps, fuel pumps and regulator rectifier. What tests should I perform to diagnose problem ? Besides major engine malfunction is there any other possible causes for the knocking sound? Lower unit etc. If blown any suggestions on where to get a powerhead or have it rebuilt in NJ.
    Thanks. Hate to miss striper season.

  2. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,074
    #2

    Re: 1999 Ficht Problem (fshrmnmrk)

    Easiest and cheapest would be check the l/u oil for metal chunks, then a compression check on the engine. JMHO

Similar Threads

  1. 1999 Evinrude 225 ficht tilt/trim problem
    By YoungBassin in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 07-07-2011, 04:06 AM
  2. 1999 ficht spark problem
    By rsingleton in forum Evinrude/Johnson Motors
    Replies: 18
    Last Post: 03-08-2010, 01:55 PM
  3. 1999 Evinrude Ficht 150 problem. Need some help from the pro's.
    By skribnod in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 05-29-2009, 01:40 PM
  4. Problem with a 1999 Evinrude 115 FICHT
    By Buzzed Bait in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 07-29-2007, 09:04 PM
  5. 1999 Ficht 200 Trim/Tilt Problem
    By soundguy in forum Evinrude/Johnson Motors
    Replies: 9
    Last Post: 02-07-2007, 04:17 PM