What bracket for the power-pole is recomended for a 2011 Triton 20xs elite with a 10" Pro Hi Jacker Plate mounted between the transom and jackplate? They offer a lot of them and I am confused.
What bracket for the power-pole is recomended for a 2011 Triton 20xs elite with a 10" Pro Hi Jacker Plate mounted between the transom and jackplate? They offer a lot of them and I am confused.
It's an 8' Signerature Series Power Pole.
Contact J L Marine. Their website has contact data for two tech reps. I contacted them about the same question for my Triton and they answered the same day. Great people to deal with. I bought my first PP used and when I went to Hydrilla Gear to get the bracket, they had such good deals on poles that I went ahead and ordered my second. All I can say is OUTSTANDING customer service with Hydrilla Gear and OUTSTANDING quality in the Power Poles.
Buddy Webster USN(retired)
2007 Triton TR-196 w/200 Optimax
2018 Chevrolet Silverado LTZ 6.2 4x4
2003 Jeep Rubicon
http://www.bbcboards.net/swap-sell/
I have the powerpole plate that I was using on my 20HP triton before I changed my jackplate. If you are interested. I only used it one month. $75 plus shipping.
Doug McClung
LSU College Fishing Alumni
what kind of jackpate did you have. Is it the kind that mounts between transome and jackplate? Is a the 2-6 off set rise?
what kind of jackpate did you have this mounted one? Is it the kind that mounts between transome and jackplate? Is a the 2-6 off set rise?
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by bshepherd »</td></tr><tr><td class="quote">What bracket for the power-pole is recomended for a 2011 Triton 20xs elite with a 10" Pro Hi Jacker Plate mounted between the transom and jackplate? They offer a lot of them and I am confused.</td></tr></table>
To mount in the location listed above you will use an pk-j-2-6 adapter plate. To be more specific
pk-j-2-6-s-blk for Starboard (driverside) mount.
pk-j-2-6-p-blk for Port.
Going new product: The plate will come with a spacer to even out the other side. The plate also includes the 3/8 hardware to mount the pole to the adapter plateHope this helps
What is the part number for the bracket I will need for my ZX200 (2010) Skeeter with a 200HP HDPI Series II? I prefer a side mount to the jack plate if possible and one that doesn't stick out too far from the boat itself. I would greatly appreciate any help you can give. THANKS.
Dons9999,
YOu'll need the PK-S-7-5-S for drivers side or PK-S-7-5-P for passenger side. We have also started shipping our new "shorty" brackets which are about half the size of our current side mount adapter plates. The item # you'll need for those would be PK-SHORT-6-(P or S). Let me know if you have any further questions!
When you say "half the size", do you mean like half as thick a bracket or just as you said"half the length that is sets back from the boat"? And can I purchase it straight from you? If so, are they in stock and can I pay UPS RED or FedX and receive it ASAP?
I did order and receive the "shorty bracket" and I am extremely pleased. I recommend that anyone out there that wants a bracket and doesn't want the power pole to stick too far out from the boat itself for storage problems like in your garage then THIS IS THE BRACKET FOR YOU! So simple to install it took me about 5 minutes to install it and the power pole to the Jackplate! AMAZING!
Reply With Quote