Looking for a little info on which bracket you guys are using for the power pole. I have a 2006 model 201 Pro XL with a 10" Bob's Hydo jack plate. I am looking to mount a 8xl power pole. After looking at the power pole website it looks like I will have to buy a bracket that goes between the jp and boat. Does the rub rail get in the way of the bracket? Thanks you guys the Stratos family is always a big help.
Extreme,
The best bracket for your boat will be the PK-M-2-6 mounted between the motor and jackplate. This bracket will require the Bob's spacer kit to work. The bracket will mount between the motor and jack plate. Please let me know if you have any further questions.
my rub rails where in the way... i forget the model but these have a notch out at the top of them.. Why would you mount them directly to the jackplate?
Extreme check with Hydrilla Gear (rich) hes made a bracket that looks to bolt to the JP using the JP slide bolts.
Stroker 21
Mercury 250 PRO XB
TN Bluewater dealer/rep.
BBO
Ep72, Thanks for tossing that out there. My bracket only works for Bullet Bass Boats.
As far as mounting to the side of the jack plate goes. Some guys like this option because it makes for an easier install. Most ALL of my customers like this route over removing the motor or jack plate from boat.
Hydrilla, do you have a pic of how yours looks and is mounted on your bullet, would love to see how you did it on the bullet.
2002 20XDC
2003 250 0X66
Reply With Quote
