graph in bow plate

[DELMARVA DAVE]

I have a zx250 has anyone recessed there graph in front plate with the trolling motor plug and trim switch ,it looks like it could be cutout and fitted in ,any pics would be great,Dave

[MD 20i]

i have a humminbird 727 in my front plate. my boat is a 2004 zx225

[looking4five]

I have a X-135 flush mounted in mine. (07'ZX200) It must not be hard to do, it only took the guy at the dealership less than an hour to install.

[rwtzx]

They make mounting kits for that. It's easy to do, although you are limited to the size unit you can put in there. I have an X-135 in mine and that is about as big as will fit. The whole install including the TM transducer takes about 1.5 hours.

[fishin couillon]

Should be easy to do. I'm building a panel for the front of my bow (SX190) to fit a regular size depth finder. I think the hardest thing would be runing the wires to the back. Of course, i already have the wires for my X47 now. so i'll just hook right up to that.