Exhaust Ring?

[Pieman]

I have a 1997 - 200hp Vindicator, I have a 24" raker, and would like to try a 25" or 27" renegade. The thrust washer size is different, I have found the part number for that (126869, correct me if I'm wrong). I would also like to get the exhuast ring, can anybody tell me what part number that is for my motor?

Also, I had my motor in for a service a few weeks ago and had it on the water yesterday for the first time and the water pressure guage wasn't working. I had my service guy replace a waterpump impellar. There was water coming out of the motor so I know the pump was working just not the guage, where should I start looking to try and fix this?

Thank you
Pieman


Modified by Pieman at 9:31 AM 5/9/2005


Modified by Pieman at 9:32 AM 5/9/2005

[THE WITCHDOCTOR]

Un hook the water hose from the gage, blow though it, hook it back up and see if it works. If not, might try blowing a little air in it withe th egage hooked up and see if the needle moves. On the blowout ring, you don't have to have one to run the gades, but it might blow out on takeoff.

[Roddy]

Ran a gade for 10 years without a blow out ring, no problems. Have one on this motor don't know if I need it or not. If you need a thrust washer, I have one I'd sell.

[Pieman]

Hey Roddy,

How much for the washer?

Pieman