Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Apr 2005
    Location
    manville
    Posts
    6

    Question for Rusty

    I bought a used 19 foot 1993 basscat Pentera II with a 2000 200hp Johnson on it. With full gas tanks and live wells and myself and my son- in- law in the boat (both of us heavy weights) I can't get the boat up on plane unless he moves up to the front of the boat then once we are on plane he can return to the seat. I have tried different heights on my jack plate but to no avail Someone told me I should put a hydrofoil on the cavitation plate to get up on plane. I am not sure if this would be safe on turns at high speeds. anyways, my question for you or anyone else that wants to help is first of all should the 200 hp put that boat on plane. and if so what would you suspect might be the problem other than my habit of eating too much? By the way alot of my gages dont work so i couldn't tell what speed I can go with my boat but it does move along quite well once up on plane.

    Thanks for any help you can give me,
    Jerry

  2. Member
    Join Date
    Jun 2004
    Location
    Crosby
    Posts
    5,823
    #2

    Re: Question for Rusty (JerryB48)

    Compression & leak down check been done? What prop?

  3. Member
    Join Date
    Apr 2005
    Location
    manville
    Posts
    6
    #3
    no checks have been done yet As for the prop its a renagade 25 I believe I just packed up my van and all the paper work on the boat is in one of the plastic bins We are moving up to our summer home in a couple of days but i am sure it is a renagde 25

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,201
    #4

    Re: (JerryB48)

    Could use some info on R's you are turning at WOT and Motor height. That 200 sould snap that Cat up fairly quick. CM

  5. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,095
    #5

    Re: (ChampioNman)

    Yep it should. Get tha boys tha #'s and they can help ya out!!

Similar Threads

  1. Hey Rusty, got a question.
    By champ150 in forum Evinrude/Johnson Motors
    Replies: 12
    Last Post: 11-20-2005, 09:44 AM
  2. question for rusty
    By smalljaws in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 07-11-2005, 08:20 PM
  3. Question for Rusty
    By RBA Steve in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 06-16-2005, 03:44 PM
  4. Rusty got a question
    By cwtriton in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 03-04-2005, 09:31 PM
  5. vro question Rusty
    By toddgot5fish in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 02-25-2005, 08:01 PM