Boatless Bank Trash
back up camera!!!
[SIGPIC][/SIGPIC]
Your fair share is not in My Wallet.
2013 Ranger Z520c, 2013 Yamaha 250 SHO
2018 Ranger Z521c, 2018 Yamaha 250 SHO
It's wireless going from the sender to the monitor. The camera attaches to the licenses plate and has "wedges" on the screws where you can point it down at the angle needed. wiring from the camera goes to the sender. I took the left light out, connected the sender to the backup light wiring and zip tied it out of the way, then reinstalled the light. On the dash, find a convenient place for the monitor and it plugs into the accessory plug with an accessory type plug. Took me a couple of hours, mainly cause I was meticulous as to where/how the monitor was mounted.
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
Here is another method
Coupler Connect Trailer Alignment Device | Trailer Alignment| Northern Tool + Equipment
Good Luck
![]()
2007 Sterling 22xs-Yamaha 250-Dual 10 foot blades-Ipilot-Bobs Jack plate-HDS 8 (SOLD)
2016 Sterling 220XS: (SOLD)
2008 SCB Topcat 250 XS (SOLD)
Current:
2014 SCB Stingray Sport Merc 300XS
2018 ES Custom Revolution 25 Merc 400R
https://lci1.com/assets/content/support/complist/Quick%20Bite%20Couplers%20and%20Components.pdf
If you can find a QuickBite coupler, they work well. I had one on my last boat and loved it. It appears they are no longer manufactured.
You could also use a gopro camera if you use one while fishing, and a sticky mount for the bumper area. Then turn on the wireless and connect to your smart phone. You would have a screen in the cab via smart phone, and a simple to remove camera on the bumper area while you are backing up. Never tried this, but I don't see why it wouldn't work.