livewell pump questions

[snmcc]

What are the inlet and outlet sizes? 1996 171 and what GPM did the boat come with?

Any help is appreciated. Dang getting to it is a pain...

[littlemule]

3/4 outer diameter, youll need 3/4 inner diameter hose. if your talking about the pump on the left that fills the livewell, mine is a 750 GPHour.

[snmcc]

Cool thanks that was what I was looking for. I am putting a 800 back in. Frozen up and fried is not good. New timer switch going in to so all should be good again by the weekend.

Taking that tank out is a bear. It is amazing how much fuel is left in the tank after the bulb stops pumping..

[Steve 187]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by snmcc &raquo;</td></tr><tr><td class="quote">

Taking that tank out is a bear. </td></tr></table>

Wait until you go to put it back in. Mine going in made taking it out look easy.......

[snmcc]

I pulled the trolling batteries out so I have room to stand while I move that dang thing. There is alot of gas left even after I hand pumped it to were it would not pull anymore out.

[Tx Champ]

Pull the lid off the compartment, then you can lie between the seats and over into the bilge area to work. That's a lot easier then trying to work over the side or climb down in there.

[snmcc]

New switch and pump installed and ready to go.