Can someone give me an idea of the length of a 202 from the rear corner edge of the boat to the tip of the trailer tongue with a dual axle trailer without a swing-away tongue. The motor doesn't matter because it will extend farther into the garage. The rear of the boat does because it will hit a corner wall in the garage. The space I have to work with is 22ft 10inches. Thanks.
I'd take a guess at lil over 24' I'll tape it out later if you'd like, the rear corner of the boat, the trailers corner is still out about 10 inches
The duel axles are a bear to jockey around inside a garage, my trailer, a TI came with a pull out tounge, which in it's self is a heavy beast.
I'd really appreciate that. A better description might be to measure from the transom tie down hook on the boat to the trailer tongue....whatever sticks out the farthest and would hit a wall. If the trailer would hit before the boat then measure from the trailer.
Modified by BalsaBee at 12:15 PM 2/12/2011
I have a 25 foot deep garage I have to pull my tounge out to be able to close the door. I have about 8-10 inches in front and back with the motor trimmed down on a 6 inch plate. With the tounge removed.
Hope this helps.
Todd Lahey
Lawrenceburg IN
2019 Bass Cat Lynx
I'll go measure mine when im done eatin breakfast.
Bass Cat
Eyra 300xs
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by DaveH »</td></tr><tr><td class="quote">I'd take a guess at lil over 24' I'll tape it out later if you'd like, the rear corner of the boat, the trailers corner is still out about 10 inches
The duel axles are a bear to jockey around inside a garage, my trailer, a TI came with a pull out tounge, which in it's self is a heavy beast. </td></tr></table>
23'4" check the angle as it sets back into the corner of the garage, you still might have to add some for the engine or lower end, and if it's close just get out a saw and doublejack... wish I could keep mine at the house, no room...
Reply With Quote