Results 1 to 7 of 7

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Member
    Join Date
    Jun 2012
    Location
    Oklahoma City
    Posts
    1
    #1

    same issue

    Quote Originally Posted by ChampioNman View Post
    1000-1100 RPM is about normal until the motor warms up. Then ~900 is what it should be at in neutral. Once in gear the RPM's will drop to around 700. Have your dealer check the idle timing and speed. Yes BBC lost some posts with the move. Also make sure the throttle roller and timing roller are set per the sticky that is posted above.

    ogdog....
    did you ever figure out your issue? I have a 93 150 FS and am experiencing the exact same problem. Any help or feedback would be appreciated, about to pull my hair out.

    thanks -

  2. Testing
  3. Member
    Join Date
    Aug 2009
    Location
    Wichita KS
    Posts
    4,917
    #2
    Quote Originally Posted by tritico View Post
    ogdog....
    did you ever figure out your issue? I have a 93 150 FS and am experiencing the exact same problem. Any help or feedback would be appreciated, about to pull my hair out.

    thanks -
    Do a search on this problem. I think you will find some help.

Similar Threads

  1. Help with idle and tach on 92 Fast Strike 150
    By Ogdog in forum Evinrude/Johnson Motors
    Replies: 11
    Last Post: 01-28-2012, 06:01 PM
  2. 1994 Johnson 150 Fast strike Idle
    By javelinbass in forum Evinrude/Johnson Motors
    Replies: 11
    Last Post: 10-10-2011, 12:42 PM
  3. 95' Johnson Fast Strike 150 Idle Settings?
    By anderdw2 in forum Evinrude/Johnson Motors
    Replies: 13
    Last Post: 05-19-2010, 06:56 PM
  4. Replies: 5
    Last Post: 07-05-2009, 01:49 PM
  5. Rusty 63- Idle for 93 Fast Strike
    By 188ranger in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 10-17-2005, 03:18 PM