Results 1 to 3 of 3
  1. #1
    Member JoeBro44's Avatar
    Join Date
    May 2005
    Location
    Wapello, Iowa
    Posts
    14,862

    All Propped and Ready TO GO!!!

    Finally got my new prop (and a solid back up thanks to Rudy6 ). Heading up to Pool 13 for our tournament this weekend. And yes... I plan on struggling. I'm hexed on that pool. Either feast or famine and last year was famine . Hoping to find something.... anything, prefishing saturday. Best of luck to the rest of ya this weekend... Catch some HAWGS!!!

  2. Member
    Join Date
    Oct 2005
    Location
    Cedar Rapids
    Posts
    508
    #2

    Re: All Propped and Ready TO GO!!! (JoeBro44)

    Hey Joe how you been? I've been working alot. What prop did you settle on? I'm in the market for a new prop I sent my 28 raker to Mark for a little massaging and found out the blades are a 1/2 to short and theres nothing that he can do fro it. He said that it would make a good spare prop but thats it. Does Butch still have that Raker stuffed in the bottom of his closet and if so ask him what he would have to have for it. I need to get something before the end of the season.

    Thanks and take care.

  3. Member JoeBro44's Avatar
    Join Date
    May 2005
    Location
    Wapello, Iowa
    Posts
    14,862
    #3

    Re: All Propped and Ready TO GO!!! (Strat201)

    Settled on a 26 TXP. VERY strong prop. Tremendous hole shot. Not sure about top end speed as I haven't GPS'd it yet but she feels like she's running strong. Hope to get a GPS speed this coming weekend. Stock right now, I'm hurting for $$$ so I'll run it as is this year and then get it Blueprinted and Balanced this winter. I'm pretty sure he still has the 28 Raker. I'll ask him and get back to ya.

Similar Threads

  1. Trying to get boat propped corretly
    By NASCAR in forum Stratos/Javelin Boats
    Replies: 1
    Last Post: 06-26-2010, 06:44 PM
  2. OK...trying to get my boat propped out
    By Chad in forum Louisiana Fishing
    Replies: 58
    Last Post: 06-04-2010, 07:05 AM
  3. Long term damage to motor from being over propped?
    By 7days2go in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 03-15-2010, 05:43 AM
  4. 270 Evinrude 150ho etec over propped
    By bird in forum Evinrude/Johnson Motors
    Replies: 12
    Last Post: 04-03-2008, 05:55 PM
  5. 115 07 E-TEC over propped
    By Tony Fox in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 03-28-2008, 02:52 AM